冠诚钻探抽沙船：、
工艺流程：矿物料由装载机（挖掘机）上料于给料机，由给料机均匀的给料于冲洗槽，经冲洗槽的高压水枪冲洗跟矿物料一起进入振动筛，0.6cm以下的进入自动洗选机，0.6-1cm的矿物料在分级筛内清洗干净后进入选大颗粒金的设备内把大颗粒选取，1cm以上的矿物料洗干净后排走。0.6cm以下的矿物料进入自动洗选机内，经自动洗选机去泥浆水、轻砂、进一步精选后，重矿物经自动洗选机带到6黄金精选机内进行后一步精选。整套设备配有配电系统可一个人操作。

结构原理

1 、挖掘系统：由挖斗链、主驱动、斗架等组成，主要用于完成表土和矿砂的采挖作业。

2 、选矿设备：由圆筒筛、选金组合螺旋溜槽、粗选设备和精选设备组成，用于完成矿砂的洗矿、碎散、筛分、粗选和精选作业。

3 、尾矿排弃系统：由胶带输送机、砂泵等组成，用于输送排弃砾石和尾矿。

4 、供水及中矿输送系统：由水泵、砂泵、水管、砂泵管管系等组成，用于供水和中矿矿浆输送。

5 、绞车系统：由斗架提升绞车、首绳绞车、提锚绞车、横移绞车和登岸桥绞车等组成，用于进船、调船、系船、船的横移及斗架、桩柱、登岸桥的升降等。

6 、起重设备：由船首起重机、主驱动间起重机和其他起重设备所组成，用于完成各种起重工作。

7 、船体及船体设施：由平底船和各种船体设施所组成，用于安装采金船的各种设备和结构，使采金船能平稳地飘浮于水上作业。

8 、上部钢结构及房屋 : 由主桁架、前桅架、后桅架、操纵室、办公室、厂房、楼梯走台和登岸桥等组成，用于支撑和布置各种设施和设备，保证采金船在作业时操作方便，安全可靠。

9 、桩柱设置：由桩柱、缓冲装置、滑轮等组成，用于采金船采金时的船体定位和移步。

10 、压力系统：由空气压缩机、贮气罐、气压原件及管路等组成，用于给斗架提升机、提锚机等设备气闸刹车提供压力能源。

11 、供电与电气控制系统：由供电、电力拖动、电气控制及照明等部分组成，用于驱动控制采金船各种电气设备及全船照明等。

Crown-drilling pumping sand:,
Process: mineral material loaders (excavator) on the material in the feeder, the feeder evenly feed in rinse tank, high pressure water washing tank rinse with mineral material into the shaker together, 0.6cm below into the automatic washing machine, 0.6-1cm mineral material inside clean backward grader enrolled in the larger particles to large particles of gold equipment selection, 1cm above the mineral material washed away in the back. 0.6cm below the mineral material into the automatic washing machine, automatic washing machine to go after the muddy water, light sand, and further selection, automatic washing machine after heavy minerals taken within six gold concentrator final step selection . The entire device is equipped with power distribution system can be a person operation.

Structural principle

1 mining system: the bucket chain, the main drive, bucket frame and other components, primarily for the completion of the excavation of topsoil and mineral sands operations.

2, processing equipment: the cylindrical screen, choose the combination of gold spiral chute, roughing equipment and cleaning equipment, used to complete the ore washing, granular, screening, and selection of roughing operations.

3, the abandoned tailings system: by belt conveyor, sand pump, etc., used to transport the abandoned gravel and debris.

4, water supply and delivery systems in the mine: the water pump, sand pump, pipes, pipe lines sand pump and other components used in water supply and transport ore slurry.

5, the winch system: the bucket frame hoist, winch rope first, put the anchor winch, sliding winches and winch landing bridges, etc., for feeding vessels, transfer boat, mooring, boat sliding shelf and drawer, pile column, landing bridge lift and so on.

6, lifting equipment: the bow crane, the main drive between cranes and other lifting devices, used to complete a variety of lifting work.

7, hull and hull facilities: the punt and various facilities consisting of hull, gold mining vessel for installing various devices and structures that can be smoothly gold mining ship floating in the water operations.

8, the upper steel and Housing: From the main truss, foremast rack after rack mast, control rooms, offices, factories, stairs and landing walkway bridges composed and arranged for supporting a variety of facilities and equipment to ensure that mining Kim boat easy to operate when the job, safe and reliable.

9, piles settings: by piles buffer device, pulleys and other components, for locating gold mining ship hull when gold mining and venue.

10, the pressure system: air compressor, air tank, pressure piping and other components of the original and for fighting planes to hoist, lift anchor and other equipment airlock brakes provide pressure energy.

11, power supply and electrical control systems: the power supply, electric drive, electrical control and lighting components for drive control of gold mining ship and ship a variety of electrical equipment and lighting.